Our serviceFurcrak

FURCRAK High Temperature Cracking Furnace Simulation Program

FURCRAK is a rating program for the firebox sections of cracking furnaces such

as those used in Olefin and Ethylene Dichloride plants. Based on user-supplied

furnace geometry and process enthalpy curve, the program calculates operating

parameters such as firing rate, furnace efficiency, tube wall temperatures, gas-and

process-side temperature profiles, heat duties and fluxes.

FURCRAK simulates most cracking furnace types such as Up, Down, Side Fired and

Combined Firing. It takes into account the burner firing pattern, tube dimensions

and layout.

FURCRAK runs in DOS operating systems and can be accessed via Windows 3.1 or 95.

Following are some of the applications of FURCRAK:

Furnace Rating and Optimization Extend Tube Life Optimize Yield and Energy Distribution Determine Optimal Conditions for part-load operations Determine Efficiency and Heat Flux Profiles Correlate Plant Data for improved kinetic prediction and coking conditions Evaluate the effect of changes in fuel and firing patterns Use as HAZOP or Benchmarking Tool Charge and Feed Heaters CO Boilers Furnace Designs Perform, Check or Compare Designs Rate Alternate Operations Check Variations to Specs Develop Process Control Algorithms

Copyright 2006 Chowdhury Software Services Inc. All Rights Reserved. All trademarks are the property of their respective owners.

Chowdhury Software Services Inc is not responsible for content published on Web sites accessible from this site or for content received from third parties.